Animated loader dots14ComingSoonAnimated loader dots
Pipe being TIG welded
Automotive| Hegesztés és vágás

Hegesztés

Nagyobb termelékenység, kevesebb selejt és jobb munkakörnyezet

A Maxx® hegesztési védőgázok egyedülálló gázcsaládja, melyet a minőség, a termelékenység és a biztonság jegyében fejlesztettünk ki.

A Maxx® gázcsaládot valós munkakörülmények között végzett tesztelések alapján tervezték.

A Maxx® gázok a legmagasabb teljesítményt nyújtják – beleértve a jobb hegesztési minőséget és a gyorsabb hegesztési sebességet – a maximális termelékenység, a selejtek számának csökkentésére és a munkakörnyezet javítása érdekében. Termeljen többet kevesebb selejttel szénacél, rozsdamentes acél, alumínium vagy szuperötvözetek hegesztésekor

Milyen gázokat tartalmaz az Air Products Maxx® gázcsaládja?

Inolinx® gases range

Maximum performance for welding stainless steel

Ferrolinx® gases range

For faster, cleaner welding of carbon steel

Alulinx® gases range

One gas that works for all aluminium welding

Fémek / Hegesztési folyamat / Ajánlatok

Find your optimal welding gas

Looking for a welding gas to drive both productivity and profit as well as ensuring weld quality? Use our easy gas selector tool. Alternatively, for general enquiries or to receive a quote for larger volumes call us on 0800 3890202 or fill in the contact form here.

Find your optimal welding gas

Our best gas

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

We also recommend

Alumaxx Plus Standard

M21ArC20

A weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

also suitable

Alumaxx Plus Standard

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

used in certain applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Alumaxx Plus Standard

M31ArC50

A weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our Best Gas

Alumaxx Plus Standard

Ferromaxx® 7

Ferromaxx® 7 (M24ArCO7/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 7% Carbon Dioxide and 2.5% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

We Also Recommend

Alumaxx Plus Standard

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Our Best Gas

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

We Also Recommend

Alumaxx Plus Standard

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Alumaxx Plus Standard

Ferromaxx® 7

Ferromaxx® 7 (M24ArCO7/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 7% Carbon Dioxide and 2.5% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

Also Suitable

Alumaxx Plus Standard

M21ArC20

A weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Alumaxx Plus Standard

M31ArC50

A weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our Best Gas

Alumaxx Plus Standard

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Our Best Gas

Alumaxx Plus Standard

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Alumaxx Plus Standard

M21ArC20

A weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Alumaxx Plus Standard

M31ArC50

A weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our Best Gas

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

We Also Recommend

Alumaxx Plus Standard

Ferromaxx® 7

Ferromaxx® 7 (M24ArCO7/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 7% Carbon Dioxide and 2.5% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

Alumaxx Plus Standard

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Also Suitable

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Our Best Gas

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

We Also Recommend

Alumaxx Plus Standard

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

Alumaxx Plus Standard

Ferromaxx® 7

Ferromaxx® 7 (M24ArCO7/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 7% Carbon Dioxide and 2.5% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

Also Suitable

Alumaxx Plus Standard

M21ArC20

A weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Alumaxx Plus Standard

M31ArC50

A weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our Best Gas

Alumaxx Plus Standard

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

We Also Recommend

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Also Suitable

Alumaxx Plus Standard

Ferromaxx® 7

Ferromaxx® 7 (M24ArCO7/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 7% Carbon Dioxide and 2.5% Oxygen in Argon. Our thin steel specialist offers excellent weld pool control, pulsed arc characteristics and ultra low spatter levels. The choice for welding carbon, carbon-manganese and low alloy steels up to 10mm in dip, spray and pulse transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Our Best Gas

Alumaxx Plus Standard

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

We Also Recommend

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Also Suitable

Alumaxx Plus Standard

M21ArC20

A weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Used in Certain Applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Alumaxx Plus Standard

M31ArC50

A weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our best gas

We also recommend

Alumaxx Plus Standard

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

Alumaxx Plus Standard

I3ArHe30

I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

used in certain applications

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Backing Gas - Our Best Gas

Backing Gas-Also Suitable

Innomax TIG Standard

Inomaxx® TIG

Inomaxx® TIG (R1ArH2) weld process gas meeting the requirements of ISO14175:R1, contains 2% Hydrogen in Argon. Our best gas for TIG welding stainless steel improves weld quality and reduces rejects through excellent penetration characteristics and brilliant, smooth, flat weld finish. Higher productivity (up to 30% increase in manual weld speeds when compared with argon). Protects the work environment, minimal ozone generation.

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3ArHe30

I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Our Best Gas

Alumaxx Plus Standard

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

We Also Recommend

Alumaxx Plus Standard

I3ArHe30

I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Also Suitable

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

our best gas

Alumaxx Plus Standard

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

We also recommend

Alumaxx Plus Standard

I3ArHe30

I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

also suitable

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Our best gas

Alumaxx Plus Standard

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

We also recommend

Alumaxx Plus Standard

I3ArHe30

I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Backing Gas - Our Best Gas

Our best gas

Alumaxx Plus Standard

Alumaxx® Plus

Alumaxx® Plus (I3ArHe30) weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Our best all rounder for MIG and TIG welding all thicknesses of aluminium and its alloys. This mixture gives superb weldability, combined with high welding speeds up to 35% faster than possible with Argon.

We also recommend

Alumaxx Plus Standard

I3ArHe30

I3ArHe30 weld process gas meeting the requirements of ISO14175:I3, contains 30% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

also suitable

Alumaxx Plus Standard

I3ArHe50

I3ArHe50 weld process gas meeting the requirements of ISO14175:I3, contains 50% Helium in Argon. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Alumaxx Plus Standard

I3HeAr25

I3HeAr25 weld process gas meeting the requirements of ISO14175:I3, contains 25% Argon in Helium. Suited for TIG welding of all weldable metals and alloys and metal inert gas MIG welding of aluminium and other reactive materials.

Used in Certain Applications

Helium Standard

Helium

An inert gas, technical Helium is used for lifting (airships and balloons), as well as for leak detection, optical fibre production, and as a shielding gas for welding. It is the preferred shielding gas for high power laser welding. Its high thermal conductivity produces welds with an excellent aspect ratio. Its high ionisation potential results in good plasma suppression and high weld speeds.

Backing Gas - Our Best Gas

Also Suitable

Alumaxx Plus Standard

Ferromaxx® Plus

Ferromaxx® Plus (M20ArHeC20/12) weld process gas meeting the requirements of ISO14175:M20, contains 20% Helium and 12% Carbon Dioxide in Argon. Our best gas for welding carbon steel. It is suitable for carbon-manganese, low alloy and coated steels of all thicknesses with a solid wire in dip, spray and pulse transfer. It offers up to 19% increase in weld speeds compared to conventional mixtures and reduced spatter.

Alumaxx Plus Standard

M21ArC20

A weld process gas meeting the requirements of ISO14175:M21, contains 20% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Alumaxx Plus Standard

Ferromaxx® 15

Ferromaxx® 15 (M24ArCO15/2.5) weld process gas meeting the requirements of ISO14175:M24, contains 15% Carbon Dioxide and 2.5% Oxygen in Argon. Our reliable all-rounder improves weld quality and has excellent penetration properties. Tolerant to variations in weld parameters. The choice for welding carbon, carbon-manganese and low alloy steels in dip, spray and pulse transfer modes.

used in certain applications

Carbon Dioxide Standard

Carbon Dioxide

Carbon Dioxide Industrial grade (99.5%) is typically used for MAG-welding of carbon steels with solid and flux cored wires. May also be used for welding stainless and alloy steels but with flux cored wires only.

Alumaxx Plus Standard

M31ArC50

A weld process gas meeting the requirements of ISO14175:M31, contains 50% Carbon Dioxide in Argon. Suited for MAG welding of carbon, carbon manganese and low-alloy steels. It can also be used to weld stainless steels materials but only with flux-cored filler wire due to its excellent penetration. Recommended for Spray transfer modes.

Our best gas

Alumaxx Plus Standard

Inomaxx® Plus

Inomaxx® Plus (M12ArHeC35/2) weld process gas meeting the requirements of ISO14175:M12, contains 35% Helium and 2% Carbon Dioxide in Argon. Our best gas for stainless steel welding all material thicknesses on dip, spray and pulse transfer. Stable arc conditions offer all-positional capability.